Lullaby Furniture
1 / 5
| Component | Parameter | Value |
|---|---|---|
| Hand Piece | Working Voltage | 14.4V |
| Output Power | 20W | |
| Unit rise in temperature | ≤25°C | |
| Charger | Input Power | AC 220V, 50Hz |
| Output Power | 7.2V, 700mA | |
| Input Power | 30VA | |
| Battery | Voltage | 7.2V |
| Charging time | About 3 hours |
1) Axial run-out of concentricity is within 0.05mm
2) Rotating speed of 1100 rpm is suited to medical standards
3) Rotated torque: 3.3N/m
4) Supporting interface for major brand products
5) Semi-luser surface treatment for comfortable operation
6) Multipurpose interface for easier clinic use
7) Ni-MH battery without memory environment
Established in 2007, we are a medical device manufacturer integrated with R&D, production, and sales, focusing on medical drill series and micro medical electric drill series. Our main products include medical bone drills, multi-functional cannulated drills, oscillating saws, reciprocating saws, and medical electric plaster saws, applicable for Trauma Surgery, Thoracic Surgery, Joint Operations, and Veterinary Orthopedic Surgery.
● Non-professionals are forbidden from dismantling the device.
● Compatible with electricity sources 110V/60Hz - 220V/50Hz.
● Remove the battery when not in use to prevent automatic discharge.
● The battery cannot be disinfected; ensure battery compartment is dry after sterilization.
● Clean saw blades and drill bits with a purifier and keep dry after operation.
● Sterilization temperature must be below 135°C to avoid motor damage.
